No heat needed! This adhesive backing makes applying your favorite patches easier than ever before! This backing will stick to a variety of surfaces, including hard surfaces, synthetic materials, and natural fabrics. We find this backing to be stronger and longer lasting than traditional iron-on.

Application: Clean desired surface thoroughly. Use pull tab to remove contact paper backing. Place the patch in the desired position and apply firm pressure for at least 60 seconds. Best applied at 75°F. This adhesive is pressure activated, so adequate pressure is important for the best application. Your patch will be fully bonded in 3 days. As always, we recommend also stitching your patch in place for the most permanent fixture.

Iron on garment of your choice! Remember, iron-on is not a permanent fixture, so we always recommend also stitching your patch in place. Iron-on may not be suitable for all surfaces, as heat may damage some fabrics and materials.

Application: Place patch in desired location on garment, and cover with a spare piece of fabric. Using iron set to medium-high heat, apply firm pressure to patch with iron for 30-45 seconds. Turn garment inside out and repeat ironing on the backside of the patch. Allow to cool and check to see if glue has adhered. Repeat process as necessary.

The big V. This classic hook & loop backing is the perfect way to switch and swap your patches any time. Your patch comes with the hook-side (rough & rigid) applied to the back of the patch, ready for an existing loop-side surface (soft & fuzzy.) If you want to receive a matching loop-side piece to glue or sew onto your surface, select our Hook & Loop option.